Riello Dialog Plus DLP series Especificaciones descargar pdf (Pagina 18)

SPEDLPX0205REN

DIALOG PLUS

> 8.3 Configuration software

Configuration Software

UPSTools software enables the user to configure the UPS, and provides a full view of the system

parameters and status through the RS232 serial port.

Refer to the paragraph UPS Configuration for a list of the configurable values available.

UPS Configuration

The following table lists all of the possible configurable values available so as to best adapt the UPS to the

user requirements. The configuration can only be modified using the UPSTools software provided.

FUNCTION DESCRIPTION DEFAULT POSSIBLE CONFIGURATIONS

Automatic Restart

Automatic restart when

the mains power supply

returns

Enabled.

• Disabled

• Enabled

Battery low alarm

Remaining battery charge

level setting for the

battery low alarm

3 min.

• 1 – 99 in steps of 1 minute

Output frequency

Enables the user to select

the output frequency.

50Hz

• 50Hz

• 60Hz

• Auto(the UPS will set the output to

match the input frequency either 50 or

60 Hz)

Output voltage

Enables the user to select

the output voltage

230 Vac

• 220 Vac

• 230 Vac

• 240 Vac

Bypass voltage

threshold

Selects the voltage range

accepted for switching

over to the bypass

Low: 180V

High: 264V

• Low: 180 – 200 in steps of 1V

• High: 250 – 264 in steps of 1V

Battery capacity

Enables the user to set

the capacity of battery

Standard:

7.2Ah

ER: 65Ah

The user must set the capacity of the battery

if the actual capacity is different from the

default value.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Comentarios a estos manuales

Sin comentarios

Riello Dialog Plus DLP series Especificaciones Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas De Alimentación Ininterrumpida (Sai) Riello Dialog Plus DLP series