Riello Dialog Plus DLP series Guía de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 67
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
42
MASTER DIALOG 12RT
INDUSTRY Range
OTHER CHARACTERISTICS
reliable, filtered, stabilised and regulated sinewave output
(double conversion on-line technology VFI according to
EN62040-3 specifications) with filters for atmospheric
disturbance suppression
0.8 power factor makes Master Dialog suitable for
powering ICT and industrial loads
high level diagnostics: event log with 128 messages, states,
measurements and alarms - available from the built-in LCD in
several languages
BACK FEED protection: to avoid energy feeding back into the
mains supply should a fault occur.
ADVANCED COMMUNICATION
Compatible with TeleNetGuard for remote maintenance
advanced, multi-platform communication, for all operating
systems and network environments: PowerShield²
supervision and shut-down software included, with SNMP
agent, for Windows 95, 98, NT 4.0, Me, 2000, 2003, XP,
Mac OS 9.x, X, Linux, Novell operating systems. The UPS is
supplied with a cable for direct connection to the PC (Plug
and Play)
RS232 serial port
volt-free signal contacts
EPO (Emergency Power Off) shutdown input contact
input for switching to bypass by remote signal
LCD or LED-based remote control panel
generator interface: enables desynchronisation of the UPS
output from a generator supply which may be subject to
phase and frequency variations. The interface also enables
more economic use of the battery charger.
SPECIFIC SOLUTIONS
The UPS can be adapted to your requirements. Please contact
RIELLO UPS to discuss specific applications and options.
OPTIONS
UGS - UPS Group Synchroniser
Allows 2 or more UPS not in parallel to remain synchronized
even during a power failure. The UGS also enables a RIELLO
UPS to be synchronised with an independent power source,
even of a different power rating. The UGS is often used with
the Parallel Systems Joiner (PSJ).
PSJ - Parallel Systems Joiner
Connects two UPS groups operating in parallel configurations
through a power coupling switch. The Slave UPS Group is
permanently synchronised to the Master group. Should one
of the UPS in one of the parallel groups fail, the PSJ will
automatically connect the remaining UPS to the other group
via an external bypass.
isolation transformers
various lead acid battery types including 5 year, 10 year and
20 year design life, VRLA, NiCad options and runtimes up to
several hours
communications software
automatic battery circuit breaker (for remote control)
solutions for low input current distortion.
mimic panel
Sample application UPS mounted in a shelter
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 66 67

Comentarios a estos manuales

Sin comentarios